Victron BMV-700 battery monitor
BMV-700
Description
The BMV-700 is Victron's high precision battery monitor. The essential function of a battery monitor is to calculate ampere-hours consumed and the state of charge of a battery.
Specifications
Volts: | 12 |
Weight (kg): | 1.6 |
Warranty: | 2 years |
Additional Information
Precision Monitoring
The essential function of a battery monitor is to calculate ampere-hours consumed and the state of charge of a battery. Ampere-hours consumed is calculated by integrating the current flowing in or out of the battery. In case of a constant current, this integration is equivalent to current multiplied by time. A discharge current of 10A during 2 hours, for example, amounts to 20Ah consumed. All battery monitors are based on a powerful microprocessor, programmed with the algorithms needed for precision monitoring.
Standard information and alarms
- Battery voltage (V).
- Battery charge/discharge current (A).
- Ampere-hours consumed (Ah).
- State of charge (%).
- Time to go at the current rate of discharge.
- Visual and audible alarm: over- and under voltage, and/or battery discharged. - Programmable alarm or generator start relay.
BMV 700: low cost ultra high resolution monitor
- Highest resolution: 10mA (0,01A) with 500A shunt.
- Can be used with 50, 60 or 100mV shunts, current rating from 100A to 1000A
- Lowest current consumption: 4mA @12V and 3mA @ 24V.
- Easiest to wire: the BMV 600S comes with shunt, 10 meter RJ 12 UTP cable and 2 meter battery cable with fuse; no other components needed.
- Easiest to install: separate front bezel for square or round appearance; ring for rear mounting and screws for front mounting.
- Broadest voltage range: 9.5 – 95 VDC without prescaler needed.
- Communication port (Isolated RS232 interface is needed to connect to a computer)
You get the full retail package. It contains:
- 1 BMV-700 Battery Monitor (dark grey)
- Square Bezel
- Shunt
- UTP Cable (from shunt to battery monitor)
- Pos.supply cable (from battery positive terminal to shunt)